PT417
FLOAT SWITCH BOOSTER
The device is used for controlling a liquid’s level within a tank, in cases where the tank lies at a great distance from the pump’s electrical panel.
The device is used for controlling a liquid’s level within a tank, in cases where the tank lies at a great distance from the pump’s electrical panel.
It is connected to a ball float switch.
It is installed in an electrical panel on a standard relay socket.
The contact of the relay is activated when the tank level is low and thus the contact of the float switch is closed. Conversely it is deactivated when the tank is full and the float switch contact opens.
- power supply
230V AC / 50Hz
- relay outputs
One changeover contact relay 10Α / 250V AC cat. AC1
- indications
POWER ON and RELAY ON
- connection socket
Bulb type, 8p or 11p
- protection
Varistor (against overvoltage and lightning)
- operation temperature
-20 to +50 C
- max. float contact voltage
24V AC
- float connection cable
2,5mm² cross-section, 3km max. length
- enclosure
Plastic box / 42x89x94mm / IP41