PRODUCT FILES

MT812SET

GSM PUMP REMOTE CONTROL

It is an inexpensive GSM remote control system for use in pumping stations. It is installed in the water pump's electrical panel and requires very little space.

It can be adapted to the start-up circuit through a simple and easy connection. The user can activate or deactivate the pump from any distance through SMS messages or unanswered calls.

It is an inexpensive GSM remote control system for use in pumping stations. It is installed in the water pump's electrical panel and requires very little space.

It can be adapted to the start-up circuit through a simple and easy connection. The user can activate or deactivate the pump from any distance through SMS messages or unanswered calls.

Following the control, the user receives a confirmation SMS. The system also reports in case of pump failure (e.g. thermal switch drop)

The device only requires a SIM card for its activation, which is inserted in the device's front without the need to open the lid. The MT812 comes pre-programmed and the only input required by the user is to indicate the telephone numbers of one or more operators by sending an SMS message. The device's power supply (MT811) and an external GSM antenna are included in the set. It operates as a remote control with confirmation for any type of water supply and irrigation systems, regardless of the type and power of the pumps.

Portable remote control upgrade:

The MT812 can replace our older remote control models without changes in connections.
( products affected: PT600, PT605 and PT610 )

  • modem
    Quad-Band  EGSM 850/900/1800/1900
  • power supply
    230VAC / 50Hz, 10W max. power consumption 
  • antenna
    900MHz / 1800MHz external dual-band antenna
  • relay outputs
    Two (2) START - STOP  230V / 10A - AC1 relay outputs
  • indications
    Two Relay LED indicators (MT811) One Modem Status LED indicator (MT812)
  • connection socket
    Bulb type, 11p
  • inputs
    Two (2) voltage-free inputs